Saturday, July 10, 2010

How to get your knee down when you control a superbike

Web Page Hit Counter
Newegg Free Shipping


First off all we have to determine whether you are leaning the bike over far enough to even consider it. The easiest way to check is to go for a blast, do a few laps of your favorite roundabout and then pull into a lay by. Look at your back tire, feel it touch it, yeah baby more more…oo er! Does it have a shiny border between the center of the tread and the edge? There is a ridge right at the edge of most tires where the sidewall meets the tread, this stays shiny so ignore it. If you have a shiny area wider than this join (about quarter of an inch) then you are going to have to give it a bit more speed in the corners first before you try for knee down. If you have just black sticky stuff all the way to the edge of the tyre then you are already leaning the bike over far enough.


The main technique for getting the knee down is to hang off the bike as far as possible without falling off, then stick your knee out as far as it will go. Seems simple eh? Well this is not quite the end of the story. When you are on the bike and you are lunging your knee ground wards, are you actually sticking your knee in the right direction? You see many people go round and round roundabouts thinking that they are hanging off the bike and pointing their knee straight down when what is actually happening is that they are moving their bodies so that they are twisted on the bike, which feels like hanging off but really they are hanging around rather than off. To combat this you have to examine the way you hang off. The best way to do this is with a mate and the side stand. Park your bike parallel with a wall that is taller than the bike. Park it so that when the bike is fully upright the right hand mirror nearly touches the wall. Now get on the bike while on it’s side stand, hold on to the bars and hang off a bit and stick your knee out. Can you touch the wall easily with your knee? Adjust your position until you can, I might add at this point that if you have had a hip replacement you should forget all about knee down cos you have to be pretty supple in the groin area to get you legs wide enough, you arse should be only half on the seat and the balls of both feet should be on the pegs. The top half of your body should also be leant off the bike as well otherwise you sit twisted which brings your knee in towards the bike rather than away. Get used to this position and practice moving from normal to that position without looking at your knee because if you look at your knee whilst cranked over on a roundabout you’ll be selling you bike for spares in no time. Try the new riding position when going round roundabouts, it will feel extremely odd at first but you will get used to it. Now it’s time to build up some speed and get that bike leaning. Because you are now hanging off the bike the center of gravity for the bike has moved towards the center of the roundabout, the result of this is that to get the same amount of lean you have to be going faster than if you were sitting upright, or to put it another way you corner faster without leaning any further which is cool eh? All you have to do now is accelerate gradually (use a high gear it’s easier to control) whilst hanging off and keep the same line round. Remember to look round the bend as far as possible and not at the bit off road right in front of you. Try to relax, if you are tense you will get nowhere. If your foot-pegs ground down before your knee then don’t lean any further, you are already beyond the angle required for knee down so it’s just a case of getting that knee into the right position. Keep at it. The first time is always the hardest, once that’s over it gets a lot easier until the point where you can stick your knee on the ground at will.

My advice is that you should not practice by yourself, just watch and open your mind, you watch to know how people can do that. Again, NOT TRYING BY YOURSELF.

For more picture, visit: http://bikerpunks.com/mediaviewer/1033/superbike-magazine-how-to-get-your-knee-down.html

How to ride a SUPERBIKE

Web Page Hit Counter
Newegg Free Shipping


Superbikes are powerful motor bikes that are great for pleasure and racing. These super sport bikes have an engine that is larger than the typical motor bike. In addition, they can support up to 480 pounds. While they are fun to drive, superbikes are dangerous. Thus, it’s important to adhere to a few safety rules.

  1. Step 1

    Maintain throttle control. Throttle controls the engine and the superbike’s speed. Some drivers mistakenly release the throttle too quickly. This is dangerous because you can spin out of control. Instead, gradually release the throttle and maintain control of the bike.

  2. Step 2

    Keep a relaxed grip on the handlebar. Superbikes don’t require a tight hold. In fact, a relaxed grip gives you better control of the bike. However, it’s important to tighten your grip before braking.

  3. Step 3

    Drive in the right gear. Riding a superbike isn’t easy. For this matter, several driving schools offer superbike training. For a smooth ride, you’ll need to maintain the proper gear. Some drivers shift too soon or too early.

  4. Step 4

    Stay off painted white lines. Wet or icy roads present dangerous driving conditions, and the odds of having an accident increase when driving a superbike. To minimize your risk, attempt to stay away from the white highway lines. These surfaces are slippery when wet and the bike can skid off the road.

  5. Step 5

    Lower your speed before turning a curve. To maintain control on a curve or sharp turn, gradually reduce your speed and grip the handlebars.

  6. Step 6

    Wear warm clothes. If driving a superbike in the winter, be sure to pack on the layers. Wear gloves and boots to keep your hands and feet warm. Cold temperatures can slow down your body’s reflexes.


4 superbike RSV4R vs S1000RRvs CBR1000RR vs ZX10R

Web Page Hit Counter
Newegg Free Shipping


The performance of modern literbikes may be intoxicatingly fabulous, but we were becoming a little bored in recent shootouts by having to resort to splitting hairs among the Big Four’s similarly spec’d 1000cc sportbikes. Yamaha gave us a taste of something different last year with the crossplane-crankshaft version of the R1, but it has a small power number and a large weight number, so it wasn’t the game-changer we hoped would shake up the literbike pecking order. We began to feel a yawn coming on.

And that’s why we’re glad 2010 has rolled around, as it sees the introduction of two totally new four-cylinder superbike contenders. Aprilia comes to the party with the first liter-sized V-Four sportbike, while the tech-heavy Germans at BMW present the most powerful production literbike ever, the S1000RR.

Japan vs. the Euros:  2010 BMW S1000RR, 2010 Aprilia RSV4 R, 2010 Honda CBR1000RR and 2010  Kawasaki ZX-10R.

Japan vs. the Euros: 2010 BMW S1000RR, 2010 Aprilia RSV4 R, 2010 Honda CBR1000RR and 2010 Kawasaki ZX-10R.

Promises. Promises.

At the end of 2009 we started the ball rolling early for our 2010 literbike showdown, pitting a trio of Euro superbikes – all of which are powered by some variant of the Vee engine configuration – against one another. The Aprilia RSV4 Factory came out as our fave over the Italian Stallion Ducati 1198S and KTM’s formidable and refreshingly different RC8R.

At the end of the Euro literbike mêlée we stated our intent to take the V-4 Aprilia, winner of Phase 1 of the Literbike Shootout, and pair it up to the champ of the inline-Four combatants (Phase 2) for what would have ultimately been a three-part, best of the best-type series.

However, the anticipation was killing us, and when we were able to pop loose an RSV4 sooner than expected, we tossed our projected plan out the window.

So we threw our Vee-engine winner, the exotic RSV4 Aprilia, into the inline-Four battle. The Suzuki GSX-R1000 and Yamaha R1 remain unchanged for 2010, and since they didn’t win last year, there was no reason to expect a different result this time around.

Honda’s CBR1000RR took our literbike crown two years running and received some subtle tweaks for 2010 you should read about here, so it got an automatic invite.

Kawasaki’s ZX-10R also did well in our previous shootout, plus it received several updates for 2010 including new bodywork and a slicker-shifting transmission. Get the lowdown by reading this review.

Meanwhile, the biggest news in inline-Four sportbikes is undoubtedly BMW’s new S1000RR. After sampling the uber-powerful S1000 on its own at its press launch in Portugal, we were anxious to ride it in the company of its peers to find out how the German machine stacks up.

In this shootout, we were able to test the standard RSV4 R rather than the pricey RSV4 Factory we previously sampled. The R model is more closely spec’d (and priced!) to the inlines. The Factory’s use of Öhlins suspension all around, lighter forged-aluminum wheels, variable length intake tracts and a smattering of load-lightening carbon bits are what account for the hefty $5000 gap over the R model’s $15,999 tag.

During the 1198S vs. the KTM RC8R vs. the RSV4 Factory contest, the choice of the upscale Factory made sense when comparing the similarly equipped Duc and the equally premium KTM. But in this final battle of the 2010 liter sleds, the R model was the right choice. And that the R model makes the same peak rear wheel horsepower as the Factory means that the heart of the RSV4 experience remains intact.

ENGINE

BMW plays by the rules but raises the stakes, big time!

There isn’t a bike here that doesn’t have enough engine. Running all four machines on the notoriously stingy DynoJet at Carry Andrew’s Hypercycle revealed that the lowest rear wheel hp figure recorded was a formidable 149 ponies, a tie between the Honda and Aprilia. One hundred forty nine bloomin’ horsepower! And that’s the small number. The Green Machine churned out 153 hp; nothing less than impressive.

Three of the four scoots essentially made 150 hp, and that is simply more than most of us could ever need. But BMW was about to bring the pain. Our jaws dropped as an astonishing result of 175.8 horsepower blipped across the dyno’s computer screen.

The S1000RR is the new Horsepower King, but note  how its big-bore/short-stroke motor trades some low-end grunt for its  screaming ability up top.

The S1000RR is the new Horsepower King, but note how its big-bore/short-stroke motor trades some low-end grunt for its screaming ability up top.

BMW purposely played by the book when building the mighty S1000RR, as it knew in order to be competitive this was no time to reinvent the superbike wheel. The S1000RR’s most significant deviation from the reliable inline-Four formula is its substantially oversquare bore and stroke when compared to the Japanese makes.

The CBR1K and ZX-10R bore and stroke numbers are really mirror images (76.0 x 55.1 and 76.0 x 55.0mm), while the GSX-R1000 hedges more stroke with 74.5 x 57.3mm. And Yamaha’s R1 crossplane crank configuration moved in the more oversquare direction (78.0 x 52.2mm) last year than the previous generation R1 (77.0 x 53.6mm). The RSV4 R’s 78.0 x 52.3mm is basically an identical twin figure to the 2009-‘10 R1.

But none of them come close to the Beemer’s oil can-size tubes. The S1000RR’s 80.0 x 49.7mm short, fat cylinders indicate a high-revving, top-end power-favoring layout. Mission accomplished. The German brand’s first-time effort in this market has it flying head and shoulders above the Big Four – as well as the rest of the European marques earnestly contesting the liter class – in the very important horsepower contest.

The new Beemer may be the  uncontested horsepower champ, but note how the CBR dominates the  midrange game. Its strong, usable grunt advantage spans a range of  approximately 6000 rpm! Note also how the supposedly torquey V-4 Aprilia  lags behind the others and how the ZX-10R mostly outperforms the class  newcomers.

The new Beemer may be the uncontested horsepower champ, but note how the CBR dominates the midrange game. Its strong, usable grunt advantage spans a range of approximately 6000 rpm! Note also how the supposedly torquey V-4 Aprilia lags behind the others and how the ZX-10R mostly outperforms the class newcomers.

Even a blind dog could see the advantages of the S1K’s horsepower domination. The BMW gobbled up with ease the long front straight on the Big Track at Willow Springs International Raceway, inhaling slower bikes like the way an ’84 Seville’s radiator grill consumes flies. "The front end wanted to come up cresting Turn 6, and would have kept coming up if I'd not backed off the throttle," remarked recent addition to the MO staff, Jeff Cobb, "It was also very light at over a buck-twenty-plus when exiting Turn 9 and while accelerating down the front straight."

Krusty Kevin, a jaded journo rarely impressed by much these days, was stunned, too, by the BMW’s big power. “Coming onto the front straight a couple of times at a clip that seemed as fast as on the other bikes, I realized I wasn’t even using full throttle, such is its enormous top-end wallop.”

But even in the power-hungry U.S. motorcycle market we must realize that bikes are about more than just peak power found on a spec sheet. Engine character - the way a mill develops power - is equally as important as posting balls-of-brass dyno results. And in light of this reality we start to see some resistance from the old guard.

Despite a 25 hp deficit to the BMW, the virtually unchanged for three years CBR refuses to yield any ground to the new Beemer. It has a clear advantage in power against its rivals nearly everywhere below 11,000 revs.

The RSV4 R, like the Honda, is down on peak horsepower big time to  the S1000RR, but the Aprilia’s compact feel and centralized mass equate  to a bike that’s easy to flick confidently into the corners.

The RSV4 R, like the Honda, is down on peak horsepower big time to the S1000RR, but the Aprilia’s compact feel and centralized mass equate to a bike that’s easy to flick confidently into the corners.

It is a matter of fact that the Honda made the most torque over the broadest range and, more importantly, made the best use of that grunt. Aside from a strange dip (a notable drawback on the street) starting around 3300 rpm that clears up ‘round 4500 rpm, the CBR has it all over the other three from that point by several ft-lbs ‘til around 10,700 rpm when it finally relents to the BMW’s top-end biased mill.

The Honda dominates the torque game for a spread lasting at least 5000 rpm, and it does so right where it matters most: the middle. At 7500 revs, it’s making an extra 12 ft-lbs over the V-4 Aprilia, and there are several points in the rev range at which the CBR is making 10 ft-lbs more than the others.

On a racetrack with short sprints between corners, and in slow, low-gear turns, the Honda holds its own against the BMW. However, where the Honda’s middle power pays dividends is on the street, the place most literbike owners play.

The Honda’s strong, usable midrange and good throttle/fueling response are just a couple of the things that led us to dub the CBR1000RR with the unofficial title of Favorite Street Bike in this contest. But in terms of best horsepower bang for the buck and biggest grin maker, the BMW rightfully belongs at the top.

The white, red and blue  Motorsports color scheme for the S1000RR is available for an additional  $750.

The white, red and blue Motorsports color scheme for the S1000RR is available for an additional $750.

It ain’t easy bein’ green. Kawi might share that sentiment with Kermit this year. The ZX’s problem isn’t that it has any problems, but more that it doesn’t particularly stand out in the Class of 2010.

It still makes crazy power, and it develops that power with relative ease; it was surprising how quickly the shift light came on or redline arrived, as the ZX’s mill spins up quickly. There’s a fun poke of power around the 9K rpm area, right where the Zed hits peak torque. Otherwise, it’s nothing but smooth, linear power from the Kawasaki.

What’s to complain about with the Ninja? Nada. What’s to get super excited about? Well, let’s just say there’s heaps to like about the Kawasaki’s ferocious engine. Alas, it finds itself in the same subservient position to the Honda’s grunt as it did last year, and of course it, too, is down to the BMW in overall power.

The Aprilia RSV4R finds itself in a similar situation as the Kawasaki: plenty of power just about everywhere, but not quite as much as the ZX and not the same fat midrange as the Honda. It also sees a 25 hp deficit to the Beemer.

We love the raucous exhaust note the V-4 produces, sounding akin to a sprint car race motor, but we wonder how its muffler got past the EPA. “I wouldn't want a bike any louder than this,” said Kevin, “but this could be the most wonderfully musical motorcycle engine in history.”

Six-footer Jeff appreciated the Big Ninja’s  roomy ergo package. Tall riders take note.

Six-footer Jeff appreciated the Big Ninja’s roomy ergo package. Tall riders take note.

The RSV4’s throttle response in Track mode is borderline abrupt, so the smoother Sport mode is a better choice when transitioning between corners while modulating the throttle at small openings during canyon riding. On the racetrack, we preferred the sharper response of Track mode.

In a similar theme, the Beemer’s ultra-performance Slick mode setting made for equally snatchy on-off throttle response while street or canyon riding. We preferred the Race setting even on the track, while on the street the Sport setting provides smooth yet potent responses. We’re happy to report no climatic need to try the Rain mode.

CHASSIS PERFORMANCE

Sharp tools in the shed

Despite its tall seat, the RSV4 feels smaller and packaged tighter than the others. Aprilia’s mass-centralization efforts found in fuel carried partially under the seat and a compact V-4 engine lend to the sensation the bike is more akin to a 600 in terms of rider triangle and weight.

Centralized mass also masks the Aprilia’s heaviest-of-the-bunch measured wet weight of 470 pounds. Kevin felt that, despite the weight, a rider can flick it confidently into the corners. “The RSV4 feels very compact, boosting confidence that you can make the bike bend to your will.” Like the Factory model, the R model possesses excellent stability and good feedback from the front end. However, the RSV’s heft made itself known in the face of bikes that were lighter – one significantly so.

Our RSV4 R suffered a flukey electrical issue when the gear-position sensor wire grounded out after its insulation had been melted by the rear cylinders’ exhaust headers. Aprilia techs assure us they’ve never seen this problem before.

To enable us to continue our test with minimal interruption, Aprilia quickly replaced the R with an RSV4 Factory (the only version available at the time) midway through one of our rides. This gave us an excellent opportunity to compare the R to its expensive brother.

It quickly became apparent just how important a role weight savings plays in this highly competitive class. Recall that the Factory comes with lighter forged wheels in contrast to the R model’s cast-aluminum hoops. On paper, forged wheels look only to raise a bike’s price tag, but in reality the advantages are significant. The Factory was much more easily hustled through series after series of tight turns than was the R model.

“Wow, what a difference! Its lighter wheels make a huge improvement to steering and handling,” said Kevin after riding a Factory shortly after getting off the RSV4 R.

Shaving weight anywhere will pay dividends, but if you’re going to trim the fat, wheels are the best place to start in order cut down on rotating mass.

The ZX-10R (458 lbs measured wet) isn’t as plump as the Aprilia, but it’s still heavier than the remaining two. Perhaps more important to the ZX’s handling though is its comparatively mild steering geometry. Steering rake of 25.5 degrees and trail of 4.3 inches is the laziest of the group. The Priller’s rake is a whole degree steeper (24.5) than the Zed’s, and it has slightly less trail.

In a group where there truly isn’t a slow steering bike, the ZX’s geometry is the only thing we can point to that prevented it from feeling as nimble as the Honda or BMW. “It feels balanced in the corners, but it seems less wieldy than the others in this elite club,” noted Kevin.

It’s worth noting we had a more favorable impression of the Ninja’s handling in last year’s shootout, which was equipped with an accessory 6mm shim for the shock that raised the rear ride height 12mm (a 2-to-1 ratio), thereby making the steering rake angle sharper and influencing the swingarm down-slope. Wanting to test stock to stock this year, we opted to run it without shims and didn’t like it as much. If we owned a 10R, we’d definitely experiment with shims. Kawi dealers can order a “spacer set” that is an assortment of five shim sizes that can be used in combination for a variety of options. But if you don’t like its $87.96 retail price, a suitably sized washer could be substituted.

The ZX feels physically larger than the others, as it has a very roomy saddle-to-clip-on relation, and the second tallest seat height of 32.7 inches (the racy Italian RSV sits the tallest with a seat height of 33.3 inches). For those of you larger than a jockey, the big Ninja could be the right literbike. Six-footer Jeff was pleased with the ZX’s roomy rider accommodations.

“The ZX had the best ergos for my height, and I would speculate up to 6’4” riders, maybe taller,” said Jeff. However, Jeff, like Kevin, noticed that the ZX wasn’t as scalpel-like as a couple of the others in terms of steering effort or response. “It took more effort to hold a line, but not too much to be a bother, and the bike wanted to stand up while trail braking.”

The BMW’s ergo package is very similar in feel to the RSV. It’s a literbike that fits and even looks like supersport size. “Another solid-feeling chassis that remains composed no matter how hard it is pushed, accompanied by plentiful feedback and without any handling bugaboos,” said Kev.

Its 23.9-degree rake is racy, but even racier is the Honda’s 23.3-degree steering rake. The CBR and S1K have similar trail figures of 3.8 and 3.7 inches respectively. Both motorcycles provide a responsive chassis and yet both motorcycles have excellent composure despite feathery steering. As willing a participant as the BMW is to any of the rider’s steering input, the CBR is even more responsive, to the point that it feels as though the Honda anticipates the direction in which you wish to go.

Working in the Honda’s favor is its measured wet weight. At 437 full of crucial fluids, it’s a full 16 lbs lighter than the next lightest BMW that scaled in at 453 pounds fueled up and ready to go.

“With the lightest weight and sporting the most aggressive steering geometry, it’s no surprise the CBR is the agility champ,” Kevin stated. “It’s only in high-speed stuff – when its electronic steering damper automatically cranks up – that it steers heavy.”

“This  thing’s gotta weigh at least 453 pounds.”

“This thing’s gotta weigh at least 453 pounds.”

As much as we enjoyed getting reacquainted with the CBR on the track, we were reminded even more how much we liked it when ridden on public roads. With less demands on the steering damper when ridden at street pace, the Honda’s user-friendly chassis is all the more impressive for its light steering response and linear transition from upright to full lean. For a literbike with this much power, the CBR proves exceptionally easy to ride in all environments.

BRAKES

Stop it!

BMW has the best set. Period. Exceptional levels of feel and power; even at 120-plus mph it only takes one finger to reel the German screamer in, and the chassis remains stable the whole time. Along with producing game-changing power in the S1000RR, BMW also has set a high mark in braking, the new standard by which all other liter bikes will be judged.

“Best in class,” raved Kevin. “It’s amazing how well they work considering the Brembo calipers are the supposedly lesser grade two-piece units than the more fashionable monoblock calipers used on other high-end machines.”

The Honda’s binders offered very good feel and initial bite, but as satisfying as the red bike’s brakes were, they’re still not in the same league as what is found on the BMW. It’s a similar story with the gold Brembo monoblocks on the Aprilia. The RSV4’s binders are quite impressive, really, but even they’re not the same caliber as the BMW’s.

Each bike in this four-way battle for the  2010 Motorcycle.com Annual Literbike Shootout are excellent choices for  anyone in the market for a new 1000cc sportbike. However, near the end  of our evaluation it was becoming clear that either the Honda or BMW  would eventually emerge as the overall champ.

Each bike in this four-way battle for the 2010 Motorcycle.com Annual Literbike Shootout are excellent choices for anyone in the market for a new 1000cc sportbike. However, near the end of our evaluation it was becoming clear that either the Honda or BMW would eventually emerge as the overall champ.

It’s hard to believe we’re saying this, but the ZX-10R’s brakes just don’t measure up in this crowd. Boy, how times have changed!

The Kawi was once the leader in the stopping department, but in comparing its brakes to the others, the ZX’s have a soft-ish initial bite and lack the degree of sensitivity found in the other brake sets. It’s weird to make such remarks about the ZX’s brakes, ‘cause they are still excellent. Nevertheless, this is how the literbike game is played every couple years.

SUMMARY

Our street riding and a day of high-speed flogging at the track revealed a quartet of literbikes with distinct personalities.

Slight tweaks to a solid platform have resulted in the best ZX-10R ever produced. Add to an explosive and invigorating engine excellent fork compliance, great brakes, a super-slick transmission and perhaps the best slipper clutch of the bunch, and the Ninja still holds its own in this superior group. It also has the most attractive MSRP, ringing in $3000 cheaper than the less-powerful Aprilia.

Ah, the Aprilia. Of this group, the V-4 Italian superbike tugged strongest at our heartstrings. “The RSV4, more than any other bike here, makes its rider feel like something special,” said Duke. “This is the literbike to be on if you’ve got a low score on HotOrNot.com.”

And yet, as seductive as the ‘Priller is, the ultimate battle in this war shaped up between the fresh BMW and the established Honda.

When BMW released initial details on the S1000RR in May of last year, and we then got up close and personal for the first time with the S during the U.S. round of WSBK at Miller Motorsports Park, we suspected this new literbike would be a worthy contestant. Additionally, when Kevin attended the bike’s world unveiling in Portugal last year we started to get a sense of how well the S might perform against the other bikes in the class.

But it wasn’t until this comparison review that we fully understood just how flippin’ great the new Beemer is!

However, it wasn’t a black and white thing, as the venerable CBR1000RR stood strong. The Honda’s renowned midrange power makes it one of the most user-friendly literbikes yet created; its brakes are more than capable; and, well, it should be obvious at this point, but it’s worth singing the praises, one more time, of the CBR’s overall chassis performance.

The Honda, although hardly changed much in the past three years, seemed always nipping at the BMW’s heels. Yet, as solid as the bike from Big Red is, it simply isn’t all that the S1000RR is.

With a base MSRP of $13,800 the BMW is a mere $401 more than the standard model CBR. How many people have spent double that difference, and then some, trying to gain an extra 10 or so ponies?

Would you spend 400 clams to get another turn-key 25 horsepower? We’re guessing a lot of folks in the market for a 2010 literbike would gladly eBay that rarely used set of golf clubs or something to cover the marginal difference in MSRPs.

Give the CBR its only available option of C-ABS, and the Honda’s retail goes up $1000 to $14,399.

For an extra $1480 over the BMW’s standard price, a Beemer buyer gets ABS and BMW’s Dynamic Traction Control (DTC). And let’s not forget the BMW also has four engine mapping modes that the bike’s brain seamlessly integrates with the ABS and DTC to make for an electronics package heretofore unseen on a consumer-available literbike. This impressive and practical e-package bumps the Beemer’s tag by only $881 more than the C-ABS-equipped Honda’s price, and it’s still less than the RSV4.

Perhaps we didn’t find the BMW’s handling quite as lovely as the Honda’s, but it was still about 9/10ths of what the Honda offered. Factor in superb braking, an extra 25 hp, all the highly effective electronic rider aids, and the new BMW is the bike to beat in 2010.

Notes, observations and musings
• The Aprilia in this test, as well as the RSV4 we had at the end of last year, routinely registered below 30 mpg, while the other bikes averaged 35 mpg or more at times.
• Although none of the liters have especially good mirrors, the CBR’s offer the best field of view.
• The CBR is still the only bike without a fuel gauge or gear position indicator.
• Each of the BMW’s compression and rebound adjuster positions (adjustable with the ignition key!) are numbered 1-10. Most other suspension systems have you listening for and counting clicks like a thief trying to crack a safe.
• Measured wet weights: CBR – 437 lbs, BMW – 453, ZX – 458, RSV4 R – 470
• According to a report in Sport Rider, the RSV4 Factory’s wet weight (462) reveals an 8 lbs savings over the R model we weighed.
• Regular guest tester and owner of exotic motorcycles, Kaming Ko recognizes a good motorcycle when he sees and rides one. “The Honda CBR1000RR is still one of my all-time favorite bikes,” he said reassuringly. “If I were to buy an everyday sportbike, I would pick the CBR. But, the good news is my lovely wife says I can have two! So, I may have to add the BMW S1000RR to my list!”

In my view, Kawasaki ninja ZX10R is faster and stronger (maybe because I love Kawasaki). Although all of them are not my favorite bike, they still be strong monsters in the world.

SOURCE: http://www.motorcycle.com/shoot-outs/2010-literbike-shootout-rsv4-r-vs-s1000rr-vs-cbr1000rr-vs-zx10r-89393.html

Web Page Hit Counter
Newegg Free Shipping


The VFR line has carried Honda's flag since the early '80s, when Honda realized that the motor from the old Sabre could, with appropriate tweaks, power the Interceptor. By the time bikes like Suzuki's GSX-R750 and Honda's own Fireblade had come along, Honda's race-rep V-Fours – the RC30, then RC45 – seemed exotic but somewhat beside the point.



The Interceptor, though, held on to devotees; riders who demanded performance but were unwilling to give up comfort to get it. The Interceptor line, in the last 25 or so years, has been Honda's premiere showcase; sometimes for desirable technology like the single-sided Pro Arm swingarm, sometimes for less-than-desirable tricks like V-TEC variable valve timing.

In talking about the new VFR1200F, Honda's been careful to position it as a new thing, “its own thing.” They've been careful to say that it's not a one-for-one replacement for the Interceptor.

But it is. That was obvious when the new VFR1200F was revealed in a conference room at Honda's Torrance, California HQ. After an appropriate amount of ooh-ing and ahh-ing by the assembled journalists, the curtains were opened and the new bike was wheeled out into a courtyard where it was placed at the head of a line-up of... all the old Interceptors (plus a few other notable V-bikes, including an NR750!)

Such was the anticipation of this bike that when it was first wheeled out, the journos – who normally descend on new metal like vultures on a fresh carcass – formed a circle about 20 feet in diameter around it. It was as if none dared be the first to approach it.

Yet at the same time, the first look was also tinged with a little disappointment, if only because this new platform will “soon” be available with optional dual-clutch technology. That was the bike I thought I was coming to see; it will give riders the option of servo-assisted paddle shifters or even a fully automatic six-speed tranny.

Conceptually, dual-clutch tech is simple: a pair of clutches split the power transmission between odd- and even-numbered gears. If you're, say, accelerating in second gear, third gear is already engaged but the 'odd' clutch is disengaged. When you want to upshift, you touch a paddle on the left 'bar, and in an instant the 'even' clutch disengages and the 'odd' one engages. There's no detectable interruption in power to the rear wheel. Such systems have been around for quite a while in racing cars and are about to become fairly common in some run-of-the-mill production cars, like the Ford Focus. However until now, no one but Honda has managed to make one small enough for motorcycle use.

When it's available as an option, the dual clutch may prove to be a real revelation. Given motorcycles' relatively high power-to-weight ratios – and high centers-of-mass – it seems reasonable to assume that a dual clutch will work even better on two wheels than it does on four.

But if the VFR1200F we saw was “just” the base model, equipped with a familiar foot-shift six-speed tranny, was it unworthy of all that attention? I say no. Once I got over the disappointment of not seeing the dual-clutch version, I realized that there's a lot to appreciate in the new machine.

One thing everyone was saying on the way in (albeit sotto voce; we were after all on Honda's turf) was, “I hope it doesn't have variable valve timing.” I'm happy to report that it doesn't. Honda's V-TEC works brilliantly in car engines, but the simpler variation used on the previous generation of VFR800 was cumbersome, noisy and unsettling.

If anything this new 1237cc V-Four has ditched that unnecessarily complex valvetrain and adopted a conspicuously simple one: the “Unicam” design as seen on Honda single-cylinder dirt bikes. Unicam motors have, as the name implies, a single overhead cam. The intake valves are actuated directly by the lobes, while the exhaust valves are operated via rockers.

Thanks to the  crank layout, the part of the motor that the rider straddles is nice and  narrow; that makes the seat seem lower and the whole bike seem small,  despite the fact it is several inches longer than the VFR800. Even the  seat's got some new tech: the cover is not a separate layer over  padding, it's molded right in.

Thanks to the crank layout, the part of the motor that the rider straddles is nice and narrow; that makes the seat seem lower and the whole bike seem small, despite the fact it is several inches longer than the VFR800. Even the seat's got some new tech: the cover is not a separate layer over padding, it's molded right in.

One of the advantages of this system is that the cylinder heads are compact, allowing the V-angle to be reduced to 76 degrees. Unlike the VFR800 crankshaft, with two crankpins that are 180-degrees apart, the VFR1200F crank looks like the "360-degree" crank on the RC45, which was sometimes also called a "big bang" crank. But on closer examination, you'll find that each crankpin is offset 28 degrees. This out-of-phase arrangement, combined with the 76 degree V-angle, results in a motor with near-perfect primary balance; there are no counterbalancers required to quell vibration.

As for a question all fans of Honda V-Fours will ask: But does it have that characteristic “fwoar” sound? I can't tell you. We did not hear the bike run. (And no, Honda wasn't foolish enough to leave the key in it!)

The 'conventional transmission' version I saw was equipped with a slipper clutch, which will be standard on that version. The optional dual-clutch version will not be a dual slipper arrangement. (Slipper clutches weigh more than conventional ones, and the dual-clutch option weighs 22 pounds more than the conventional bike as it is.)

In the presentation, Honda emphasized the attention spent on rider ergonomics and design details – all those elements of art and science that combine to give a bike its feel. That extends to basic engineering. For example, the crankpins of both rear-facing cylinders are in the middle of the crank, while the front cylinders are outboard. That allowed Honda to make the area between the rider's legs as narrow as possible. I'm 5-foot-7 with a 30-inch inseam, and I can easily flat-foot this bike despite the 32.1-inch claimed seat height. The riding position felt (admittedly only at a standstill, and only for a few moments) far more neutral than most current sportbikes.

Although the new machine shares nearly identical rake and trail figures (25.3 degrees; 101mm) with the VFR800, its wheelbase is nearly 3 inches longer (60.8 inches) and 50 pounds heavier than its older sibling. Curb weight, full of all fluids and fuel, is said to be 591 pounds. Honda didn't release any claimed power figures, but it's easy to imagine that the bigger motor can push an extra 50 pounds around. How it will handle remains to be seen.

Everything about this bike suggests that Honda's positioned it for serious high-mileage riders. This is the first time Honda's put a shaft drive on a machine with sporting pretenses. They say that it feels “like a chain,” but lubing and adjusting a chain are chores high-mileage riders won't miss. A 4.9-gallon fuel tank should offer reasonable if not impressive range.

It's equipped with mounting points for hard luggage, and if you add baggage or a passenger, it's easy to adjust the shock preload thanks to a remote adjuster. The fork's adjustable for preload too, of course. The only other adjustment available is rear rebound.

You can look at the photos and draw your own conclusions about the way it is styled, but the bodywork looks as if it offers good weather protection. If it seems as though there's a body outside the body, that's because there are in fact two layers. Honda claims that the slick outer layer – there aren't any rivets or fasteners visible on it at all – channels cool air onto the rider's legs. The inner layer channels air through the cooling system and out vents at the bottom of the fairing.

That's hot weather taken care of, but what about wet weather? It's equipped with a revised linked ABS. This is not the same ABS that works so well on the CBR1000RR ABS version. It is linked in one direction only, which is to say that if you activate the rear brake, the front will also work. But if you are using the front brake only, it won't override you and link the rear. On the subject of direct and indirect rider controls, this is the first Honda production bike with a fly-by-wire throttle.

Honda did not release pricing for this version of the VFR1200F at the press reveal. They assure us it will be available early in the New Year in any color you want as long as it's red. The dual-clutch version will be available “some time in 2010.”

We'll be able to tell you much more about the conventional-shift VFR after we get a chance to ride it in December. Stay tuned.

VFR1200F Specs
Engine Type 1237cc liquid-cooled 76° V-4
Bore and Stroke: 81mm x 60mm
Compression Ratio: 12.0:1
Valve Train: SOHC; four valves per cylinder
Induction: PGM-FI with automatic enrichment circuit, 44mm throttle bodies and 12-hole injectors
Ignition: Digital transistorized with electronic advance
Transmission: Six-speed (VFR1200F) / Six-speed automatic with two modes and manual mode (VFR1200F with Dual Clutch Automatic Transmission)
Final Drive: shaft
Front Suspension: 43mm cartridge fork with spring preload adjustability; 4.7 inches travel
Rear Suspension: Pro Arm single-side swingarm with Pro-Link single gas-charged shock with remote spring preload adjustability and rebound damping adjustability; 5.1 inches travel
Front Brakes: Dual full-floating 320mm discs with CBS six-piston calipers with ABS
Rear Brake: Single 276mm disc with CBS two-piston caliper with ABS
Tires: 120/70 ZR17 radial (Front) / 190/55 ZR17 radial (Rear)
Wheelbase: 60.8 in. (1545mm)
Rake (Caster angle): 25°30’
Trail: 4.0 in. (101.0mm)
Seight Height: 32.1 in. (815mm)
Fuel Capacity: 4.9 gal.
Color: Red
Curb Weight: 591 pounds (VFR1200F) / 613 pounds (VFR1200F with Dual Clutch Automatic Transmission)

SOURCE: http://www.motorcycle.com/manufacturer/honda/2010-honda-vfr1200f-revealed-88803.html

Web Page Hit Counter
Newegg Free Shipping


The Honda PCX125 is one of the first 2011 products to be seen by a major OEM, and this stylish scoot adds more spice to Big Red’s already bulging scooter lineup.

The PCX is powered by a liquid-cooled 125cc single-cylinder engine, landing in Honda’s line-up between the China-built Elite 110 and the Italian-built SH150i. The PCX is the first import coming from Honda’s newly constructed Thailand plant.



Being a ‘world’ model – which means the unit’s emission and efficiency standards and specs conform to many markets at once – some of the special cool euro-styled stuff we often lose for USA-bound versions are included, such as a centerstand (as well as a sidestand) to serve varying opinions on the parking matter. Otherwise, there’s the global emission standards met via electronic fuel injection and a three-way catalytic converter.

High on  MPG, low on monthly payments. MSRP: $3,399.

High on MPG, low on monthly payments. MSRP: $3,399.

Small yet feature-packed, the PCX sports the ‘twist-n-go’ Honda V-Matic drive system (belt-converter automatic transmission), sparing the rider of any shifting or clutching needs. The undersquare engine and two-valve cylinder head provide decent levels of torque for quick getaways.

Honda's Middleweight Scooter Lineup
Model 2010 Elite 110 2011 PCX 125 2010 SH150i
CC engine 108 125 153
Wheelbase (inches) 50.2 51.4 53.4
Wheel Size(s) (Fr/R) 12/10 14 16
Saddle height (inches) 29.1 29.9 30.9
Curb Weight (pounds) 254 280 302
MPG (Honda Claims) 100+ 110
MSRP (USD) $2,999 $3,299 $4,499

As you can see from the accompanying table, the new 125 falls mid-pack on specs and cost across the board. The PCX is slightly larger in wheelbase (51.4 inches compared to the Elite 110’s 50.2 inches) and saddle height (29.9 inches to 29.1, respectively), the PCX is sure to be a hit with their target market – youth and new riders.

The PCX has longer suspension travel compared to the 110, so the new model should offer a more forgiving ride, if even a little. The PCX's Unit rear swingarm is suspended by a single shock with 2.9 inches of travel while the 31mm hydraulic front fork has 3.5-inches; neither is adjustable.

Also helping smooth the PCX’s path are its larger 14-inch wheels (which, by the way, look really light with their thin-spoke design –Ed.). An IRC 90/90-14 leads the way, followed by a 10mm-wider rear. The PCX has a fully fueled curb weight of 280 pounds.

Light and economical, the PCX is sure to be a hit with the targeted college youth crowd. And the fuel-injected single-overhead-cam engine will make the miles come even easier, topping out at about 50 miles per hour.

So far this year, a custom-painted PCX has been on display to graduating classes at Disneyland’s grad days and getting attention. Further attracting the salary-challenged buyers in their natural environment, the PCX will be touring the country this summer along with the Honda Civic Tour, a concert series now in its ninth year and headlining with Tennessee-born rock band Paramore. Watch for television commercials and concert promos.

Aiming at youthful buyers, the  contemporary-looking PCX 125 will be on tour this summer.

Aiming at youthful buyers, the contemporary-looking PCX 125 will be on tour this summer.

Keeping safety a top priority for those newly addicted to riding “in the wind,” the new PCX will carry the same Combined Braking System (CBS) found on both the Elite and the SH. Linking front to rear, applying a little front-disc braking before rear-drum application for better control in potential adverse conditions and emergency situations. As is with traditional motorcycles, the right hand lever applies the front brake. The left-hand lever applies pressure to both the three-piston caliper and 220mm single front disc as well as the rear wheel’s drum. Simultaneous application of both the drum brake arm and disc brake’s hydraulic piston is done via a more refined system than found on the SH150i and Elite for better-balanced stopping power.

Safety is important, but what’s more important to an image-conscious youth market is the styling. Honda doesn’t disappoint, offering a newer approach to looking cool and attracting even some seasoned sportbike eyes. It’s less Euro (a la Vespa) upright and more Japanese maxi-scooter, but at 5/8ths scale.

Modern flowing lines give the PCX an up-to-date appearance.

Modern flowing lines give the PCX an up-to-date appearance.

The PCX is more bodywork-intensive than the SH, with a straddling centerline housing the fuel tank (versus a true step-through design) and a VFR-ish headlight housing and contour. It’s a looker from more than one angle and better suited for shorter riders. A two-level saddle, divided by a removable butt bumper, kept me at comfort’s edge after a 30-mile ride, bordering between a tight cockpit and roomy scoot.

Going the distance is often the most important of all factors when shopping for a scooter, and the PCX is sure to stretch the dollar for the cash-strapped buyer with a claimed 110-mpg fuel economy claim. Combine that with a 1.6-gallon tank, and there’s more than 170 miles of two-wheel fun to be had for less than five bucks. And the MSRP is comparably low as well, at just $3,399, keeping the payments nearly as low as your monthly fuel bills.

As a departure from the sorely missed underseat storage on the larger and more costly SH150i, the PCX has a 2.5-liter storage area big enough for to store a full-face helmet (as can the Elite) or a course-load of school books thanks to the center-mounted fuel tank, plus another 1.5-liters of storage on the knee guard as a non-locking glove box. There’s also a helmet hook under the saddle for more security options.

Honda offers more cargo options via a 2.3-liter top box for $120.95. Bringing a friend along for the ride is also possible and supported with the switchblade-type folding pegs we¹d seen on the Elite 110.

Also seen on the Elite is the magneto-secure ignition keyhole. As a theft deterrent, Honda has integrated a sliding keyhole cover that requires the operator’s key fob to open passage to the keyhole. Each bike is individually coded to unlock only the one unit.

In the end, Honda’s scooter portfolio is expanded nicely with the new PCX, offering sportier styling than the traditionally flavored Elite and SH150i. The PCX retails for just $400 more than the Elite 110, and it’s a whopping $1,100 cheaper than the SHi.

Choose your  Weapon in Candy Red or Pearl White.

Choose your Weapon in Candy Red or Pearl White.

Picking which model suits your wallet and character is the hard part.

The 2011 PCX is scheduled to arrive at dealers in August in your choice of an ST1300-like red or a cop-bike-like white.

Source:http://www.motorcycle.com/manufacturer/honda/2011-honda-pcx-review-89731.html

Who will own Golden Ball?

Web Page Hit Counter
Newegg Free Shipping


FIFA has listed 10 players who are in the running for the Golden Ball award for the World Cup's best player.

Spain has three nominees - David Villa, Xavi and Andres Iniesta.

Iniesta

David Villa

Xavi

Germany has two in Bastian Schweinsteiger and Mesut Ozil, and the Netherlands also has two in Arjen Robben and Wesley Sneijder.

Mesut Ozil

Other nominees are Diego Forlan of Uruguay, Asamoah Gyan of Ghana and Argentina's Lionel Messi.

Messi

Forlan

Accredited media at the World Cup will vote for the best player.

Three other players have been short-listed for the Best Young Player award.

The three nominees are Germany's Thomas Mueller, Mexican Giovani Dos Santos and Andre Ayew of Ghana.

For Mueller, the nomination marks another step in a meteoric rise from reserve team football with Bayern Munich just over a year ago to the brink of a major award at the game's highest level.

He has been in outstanding form in Germany's bold campaign, scoring four goals and credited with three assists.

He only made his first appearance for Germany in March and has been in devastating touch at the World Cup, particularly in the big wins over Australia, England and Argentina.

Dos Santos played most of the last club football season on loan in Turkey with Galatasaray.

This is not his first World Cup experience - he was a winner of the under-17 world championship played in Peru in 2005.

Ayew has also tasted success at international level, as a winner of the under-20 world championship with Ghana last year.

The son of all-time African great Abedi Pele was a vital part of Ghana's surprise run to the quarter-finals and man-of-the-match in the second round clash with the United States, which Ghana won 2-1 in extra-time.

Both awards will be announced after the World Cup final.

Source:http://www.abc.net.au/news/stories/2010/07/09/2949949.htm?site=sport&section=football

New place!

Web Page Hit Counter
Newegg Free Shipping


It's one month since I moved here. Everything with me is very strange...
The weather is so cold (only 1-4 degree at night), so different from my City (over 30 degree)...

But now, I am familiar with this weather and I like to walk around my place, go shopping (only for sightseeing ^^)...

Yesterday, I was craving for watermelon, I decided to buy one piece of it (so expensive!!! :( but it was very delicious)...
By the way, when I went to supermarket, I saw many beautiful and delicious tomatoes...
To be continued...